N. Soro, L. Brassart, Y. Chen, M. Veidt, H. Attar, M. Dargusch. Finite element analysis of porous commercially pure titanium for biomedical implant application. Under review.
F. Delannay, L. Brassart. Strain rate dependence of the contribution of surface diffusion to bulk sintering viscosity. Under review.
F. Delannay, L. Brassart. Transient and asymptotic components of mass transfer by coupled surface and grain boundary diffusion in sintering under strain rate control. Under review.
A. Simar, A. Mertens, S. Ryelandt, F. Delannay, L. Brassart. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. Mater. Sc. Eng. A 723, 324-333, 2018.
L. Brassart, Q. Liu, Z. Suo. Mixing by shear, dilation, swap, and diffusion. J. Mech. Phys. Solids 112, 253-272, 2018.
L. Brassart, L. Stainier. Effective transient behaviour of inclusions in diffusion problems. ZAMM – Z. Angew. Math. Mech. Journal of Applied Mathematics and Mechanics, 2018. In Press
L Brassart, Q Liu, Z Suo. Shear, dilation, and swap: Mixing in the limit of fast diffusion. J. Mech. Phys. Solids 96, 48-64, 2016.
Q. Lai, L. Brassart, O. Bouaziz, M. Gouné, M. Verdier, G. Parry, A. Perlade, Y. Bréchet, T. Pardoen. Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: experiments and micromechanical modeling. Int. J. Plasticity 80, 187-203, 2016.
C. Zhai, D. Hanaor, G. Proust, L. Brassart, Y. Gan. Interfacial electro-mechanical behaviour at rough surfaces. Extreme Mech. Lett. 9, 422-429, 2016.
Q. Lai, O. Bouaziz, M. Gouné, L. Brassart, M. Verdier, G. Parry, A. Perlade, Y. Bréchet, T. Pardoen. Damage and fracture of dual-phase steels: Influence of martensite volume fraction. Mater. Sc. Eng. A646, 322-331, 2015.
S. Kammoun, I. Doghri, L. Brassart, L. Delannay. Micromechanical modeling of the progressive failure in short glass-fiber reinforced thermoplastics – First Pseudo-Grain Damage model. Composites A 73, 166-175, 2015.
J. Li, Q. Liu, L. Brassart, Z. Suo. Mechanics of supercooled liquids. ASME J. Appl. Mech. 81, 111007, 2014.
L. Brassart, G. Sandu, J.-F. Gohy, T. Pardoen, S. Melinte, A. Vlad. Surface coating mediated swelling and fracture of silicon nanowires during lithiation. ACS Nano 8, 9427-9436, 2014.
A.-P. Pierman, O. Bouaziz, T. Pardoen, P.J. Jacques, L. Brassart. The influence of microstructure and composition on the plastic behaviour of dual-phase steels. Acta Mater. 73, 298-311, 2014.
L. Brassart, Z. Suo. Reactive flow in solids. J. Mech. Phys. Solids 61, 61-77, 2013.
L. Brassart, K. Zhao, Z. Suo. Cyclic plasticity and shakedown in high-capacity electrodes of lithium-ion batteries. Int. J. Solids Struct. 50, 1120-1129, 2013.
K. Zhao, Y. Li., L. Brassart. Pressure-sensitive plasticity of lithiated silicon in Li-ion batteries. Acta Mech. Sin. 29, 379-387, 2013.
B.Miled, I.Doghri, L.Brassart, L.Delannay. Micromechanical modeling of coupled viscoelastic- viscoplastic composites based on an incrementally affine formulation. Int. J. Solids Struct. 50, 1755-1769, 2013.
L. Brassart, Z. Suo. Reactive flow in large-deformation electrodes of Lithium-ion batteries. Int. J. Appl. Mech. 4, 1250023, 2012.
L. Brassart, L. Stainier, I. Doghri, L. Delannay. Homogenization of elasto-(visco)plastic composites based on an incremental variational principle. Int. J. Plasticity 36, 86-112, 2012.
L. Brassart, L. Stainier. On convergence properties of variational constitutive updates for elasto-visco-plasticity. GAMM-Mitt. 35, 26-42, 2012.
L. Brassart, L. Stainier, I. Doghri, L. Delannay. A variational formulation for the incremental homogenization of elasto-plastic composites. J. Mech. Phys. Solids 59, 2455-2475, 2011.
I. Doghri, L. Brassart, L. Adam, J.-S. Gérard. A second-moment incremental formulation for the mean-field homogenization of elasto-plastic composites. Int. J. Plasticity 27, 352-371, 2011.
L. Brassart, I. Doghri, L. Delannay. Homogenization of elasto-plastic composites coupled with a nonlinear finite element analysis of the equivalent inclusion problem. Int. J. Solids Struct. 47, 716-729, 2010.
L. Brassart, I. Doghri, L. Delannay. Self-consistent modeling of DP steel incorporating short range interactions. Int. J. Mater. Form. 2, 447-450, 2009.
L. Brassart, H.M. Inglis, L. Delannay, I. Doghri. An extended Mori-Tanaka homogenization scheme for finite strain modeling of debonding in particle-reinforced elastomers. Comput. Mater. Sc. 45, 611-616, 2009.